FASTRAX Adjustable Caster/Camber Gauge

FASTRAX Adjustable Caster/Camber Gauge

FASTRAX Adjustable Caster/Camber Gauge - Hands-free Caster/Camber adjustment at the track or in the shop! - FASTRAX displays camber over +/-4 degrees - Caster can be measured from -4 degrees to 12 degrees - Hands-free adjustment fits most 13" to 17" wheels The Fastrax Caster/Camber Gauge will allow you to read accurate alignment angles as you adjust your... » Read More

  • Description
  • Part Number
  • Price
  • Qty
  • FASTRAX Adjustable Caster/Camber Gauge
  • PPR-9100
  • Description
  • Product Reviews
FASTRAX Adjustable Caster/Camber Gauge

- Hands-free Caster/Camber adjustment at the track or in the shop!
- FASTRAX displays camber over +/-4 degrees
- Caster can be measured from -4 degrees to 12 degrees
- Hands-free adjustment fits most 13" to 17" wheels

The Fastrax Caster/Camber Gauge will allow you to read accurate alignment angles as you adjust your suspension for optimal performance and handling. Fastrax can be used quickly and accurately in the shop and at the track. The tool is designed to be used to "zero set" for level racks or floors or reset to match track or shop conditions.

Fastrax displays camber angles over four degrees, positive or negative. Camber is the inward (negative) or outward (positive) tilt of the top of the wheel as viewed from the front. Fastrax also displays caster angles from four degrees negative to twelve degrees positive. Caster is a front wheel angle only and is viewed from the side. Positive caster is described when the the upper ball joint is rearward of the lower ball joint thereby increasing handling stability and the returnability of the steering wheel to center.

Fastrax mounts to most wheels from thirteen to eighteen inches in diameter. Fit the tool so the guide studs (3) grasp either the inner or outer lip of the wheel rim. Adjust the tool to apply enough pressure for a snug fit and tighten the black clamping knob. In cases where the wheel has no rim or lip to grasp, simply hold the tool to the accessible flat surface and read your camber angles or changes.

Fastrax is "zero set" at the factory with the spring-loaded lock pin engaged. If you are using the tool at locations that may not be level, Fastrax can be reset to the new location, and will then display true angles.

Close