Electric Pumps

Davies Craig Digital Electronic Controller

Davies,Craig now has an all new 'Digital' Electronic Controller to complement its complete range of universal fit Electric Water Pumps.

This latest generation 'Digital' Controller allows you to electronically set the target temperature and it adjusts the rate of flow, hunting for and then locking onto, the temperature you set. The actual coolant temperature and other operational information is displayed at all times to keep you informed and in control.

To overcome the effects of 'heat soak', the Controller automatically continues to run the pump after ignition OFF for a period of 2 minutes or until the engine temperature is 5ºC below the target temperature whichever occurs first.

This 'smart' Digital Controller has a range of diagnostic capabilities on-board, which will analyse and report the state of your cooling system.

As with all DaviesCraig products, the 'Digital' Electronic Controller comes with everything you need for Do-It-Yourself installation. We have even included the option for installing the temperature sensor directly into the original thermostat housing.

The EWP® gives the most increased engine power and fuel saving per dollar spent - and now the new 'Digital' Electronic Controller puts you in control.

Specifications:

Input Voltage: 12V DC to 13.5V DC
Output Voltage: 5V to 13.5V
Max. Current: 12 amps
Operating Temperature: -20°C to 60°C (-5°F to 140°F)
Setting Temperature: 75°,80°,85°,90°,95°C (167°,176°,185°,194°,203°F)
Setting Method: Push Button
Controller Type: PCB with microprocessor
Sensor Type: Thermister in waterproof housing
Time-Out: 2 mins. (or 'set' -5°C) after IGN OFF
Controller Weight: 90 grams (3.2 oz.)
Controller Dimensions: 101 mm (L) x 95mm (W) x 35 (D) (4" (L) X 3.75" (W) x 1.38" (D))

Description	Item #	Price	Qty
SPA Technique Digital Electronic Controller	SPT-EWP8020