TraqData ChaseCam/Analog/Digital/RPM Input

TraqDataII allows you to connect analog and digital inputs and a tach signal input to your Traqmate. It also provides complete ON/OFF and RECORD/STOP control for a ChaseCam PDR.

- ChaseCam Video Recorder Control

- Allows Traqmate to turn on and off the ChaseCam PDR-100 as well as start and stop recording synchronously with data recording. This is the same capability as TraqSync module.

- Four Analog Inputs - Allows Traqmate to record data from a variety of sensors for driver coaching such as throttle position and steering angle, or for vehicle tuning such as air-fuel ratio, oil pressure, or boost pressure. 5, 10, and 20 V ranges are supported. Sensors are not included.

- Two Digital Inputs / Outputs - Allows Traqmate to record a digital input such as a brake light or track marker switch. Allows Traqmate to trigger an external alarm for RPM or an Analog Input.

- RPM Input - Switchable between COIL and ELECTRONIC voltage levels to handle almost any application.

The TraqData II package includes the following items:

TraqData II expansion module with removable 10 connection terminal block. Contacts are GND, RPM, Digitals 4 and 5, 12V sensor power, Analogs 0-3, and 5V Reference Voltage.

Snagless 3' Network Cable for connection between TraqData II and ChaseCam PDR-100. User may substitute longer or shorter network cable for particular application.

14" DB-15 male to male cable with thumbscrews for connection between Traqmate Sensor Unit and the TraqData II.

NOTE: This product does not include sensors which must be purchased separately. See the Traqmate Support Forum for sensor sources.